Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE ADJUST BUCKET CLEARANCE WARNING (7): Bucket (8): Arm (9): Bush 4 - 33 It is dangerous if the work eq uipment is mistakenly moved wh en adjusting the bucket clearance. Set t he work equipment in a s table condition, stop the e ngine, then se t lock leve r securely to the LOCK p If there is excessive free p lay on the coupling section o f the bu cket and arm, adjust the buck et clearance in the following manner . 1. 2. 3. 4. 1. Set the work equipm ent to the position show n in t he diagram on the right, then stop the engine and set th e lock lever ( 1) to the LOCK position (L) . bolts (4), plate (2) and plate (6). uivalent in size to free play (a).

is 0.5 mm or 1.0 mm (0.02 or 0.04 in). 2. 3. Loosen 3 bolts (3), 6 Take out shims (5) eq bolts (4), plate (2) and uivalent in size to free plate ( play ( Thickness of shim (5) is 0.5 mm or 1.0 mm ( 0.02 o When free play (a) is less than a thickness compress the shims b 4. Tighten 3 bolts (3) an Wit h this adjustment, clea rance (b) becomes larger, b ut play (a) is