. MAINTENANCE MAINTENANCE PROCEDURE WARNING doctor. the 4 - 46 CHECK LEVEL OF BATTERY ELECTROLY Carry out this procedure before operating the ma Do not use th e battery if the batt ery electrolyte level is below the L OWER LEVEL line. This will accelerate det nside of the battery and reduce the service life of th e battery. In a ddition , it may caus e an explosion. The battery g enerates flammabl e gas an d there is da nger of explosion, d o not bring fir e or sparks near the b Battery electr olyte is dangerous .
If it get s in your eye s or on your skin, w ash it off with a large amount of wat NOTICE When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPPER LE gh, it may leak and cause damage to the paint surface or corrode other parts. l electrolyte evel is too hi gh, it may leak and cause d amage to th e paint surfac e or co rrode other p When adding distilled water in c old weather, add it b efore starting operations in the m orning to prevent the freezing.
Inspect the bat tery electrolyte l evel at l east once a month and follow the basic s afety procedures gi Open cover (1 the machin are installed at When Checking Electrolyte Level from Side of Bat If it is possible to check the ele ctrolyte level from the side of t he battery, check 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. .
Use a wet cloth to clean th e area around the electrolyte l check that the electrolyte level is between VEL (U.L.) and ry is wiped with LOWER LEVEL (L .L.) lines.