Komatsu — EVERY 2000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING REMARK Check the O-rings in the plugs for damage. If with new ones. 4 - 72 EVERY 2000 HOURS MAINTEN Maintenance for e very 10, 100, 250, 5 00, and 1000 hour s of servic e shoul d be performed a t the same ti The parts and oil are at high temperature immediately a fter th e engine is stopped , and may cause se rious burns. Wait fo r the temperature to g o down before starting the operation. If there is still pre ssure remaining inside the case, the oil or p lug may fly Loosen the plug slowly to release the pr Refill capacity: Each 20 liters (5.28 Prepare a hand 1.

Set the TOP mark at the top, with the TOP mar k and plu g (P perpendicular to the ground surfac 2. Remove plug s (P) and (F) with the handle and drain the oil. age. If necessary , replace 3. Tighten plug ( P). h the hole of plug (F). 4. Add oil throug h the hole of plug (F 5. When the oil o verflows from the hol e of plug (F), i nstall plug (F) Tightening tor que of plugs (P) and (F) : 8.7 - 90.4 lbft) 93.1 - 122.5 N m (9.5 - 12.5 kgm, 6 8.7 - 90.4 lbft