. MAINTENANCE MAINTENANCE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING 4 - 73 After the engine is stopped, the pa rts and oil are at high temperature, so ther e is danger of burns. Wait for the t emperature to g o down before starting the operat When the cap of the oil filler port is removed, oil may spurt out, so turn i t slowly t o release t he internal pressure , then remove it carefull When re moving cover (1), the cove r may fly off under the f orce of sprin g (2), so l oosen the 1. Remov e the cap from oil filler (F) on top of the hydraulic Remov e cover (1) and lift up take o Remov ut spring (2) and strain e any dirt stuck to stra oil.
If s trainer (4) is damaged, replace it with a new part. 4. When i nstalling, insert straine r (4) into protruding part (5) o tank, a nd assemble. 5. Assem ble so that the protrudi ng part at the bottom of cov holds s pring (2), then tighten