Komatsu — EVERY 4000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE WARNING the the be a to The accumulator is installed to the position shown in the diagram on the right. 4 - 78 EVERY 4000 HOU Maintenance for every 10, 100, 250, 500, 1000, and 2000 h ours of service should be p erformed at the same time. CHECK WATER PU Check for leakage of o il or water. If any problem i s found, ask your Komatsu distributor t o carr y out disass embly and repair or replacement.

REPLACE ACCUMULATOR (FOR CONTROL CIRCUI Replace the accumula tor every 2 years or every 4000 hours , whichever c omes s oone The accumulator is charg ed with high-pressure nitrogen gas, so mi staken operatio n may c ause an explosion, which will lead to serious injury or damage . When handling the accumulator, always do as follows. The pressure in the hy draulic circuit cannot be completely remo ved. When removing th e hydraulic equipment, d o not stand in the direction that th the operation. e oil spurts out when carrying out the oper ation. In additio n, loose n the bolts slowly when carrying out e accumulator. me or dispose of it in fire. it or weld it. subject it to any impact.

Do not disassemble th Do not bring it near fla Do not make holes in Do not hit it, roll it, or When disposing of th e accumulator, the gas must be released. Please contact your Ko mats u distributor to ha ve this work carried out. If operations are c ontinued after the performance o pped, it will be impossible to releas accumulator has dro e to releas remaining pressure in the hydraulic circuit if there should e. Please ask your Komatsu distribu or. failure on the machin replace the accumulat