. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE 14. Return remover control selector valve (9) to its original 3) Set 72.3-90.4lbft) FREE position (d). REMARK Turn the engine starting switch OFF before operating the lock each time the counterweight is 6 - 13 The procedure for sw itching is as foll remover links (14) a nd (16) in their o riginal pos ition. the engine starting s so that the arrow on ctor valve (9) is in the en with bolt (10) and l tening torque: 9 8 - 1 2 3 N m ( 1 0 - 15. Operate lock switches (2) and (3) inside the p ump cham ber to switches. If the starting switch is ON and the lo ck switche s are operated, er the cab.
This is not a inside when error ( E07) is being displaye d. If error (E07) i s displaye d, turn the starting s witch to the OFF posi tion, then turn it ON again. Error (E07) displa 16. Add gre ase through the greas Alway remo s carry out greasing ved.