Komatsu — OPERATION OF WORK EQUIPMENT

. LOADING SHOVEL OPERATIONS OPERATIONS OPERATION OF WORK EQUIPMENT WARNING as shown in the engine speed to a Arm operation (A): Arm OUT (B): Arm IN Swing operation (A): Left swing (B):

Right swing 7 - 6 If t he lever is op erated when the engin e speed ha s been low ered by th e auto-deceleration function, the eng rise, so operat The work equ ipment is operated with the le ft work e quipmen t contro l lever and right work equ The left work equipmentcontrol le ver operat es the ar m, swing , and bottom dump (CLOSE); the control lever operates the boom, bucket, a nd bottom dump ( OPEN) The relations and the diagram on th When the lev er is released, it retu rns to the HOLD p osition a nd the work equipment is held in If the work equipment control le vers are r eturned t o the ne utral position when the machine i fuel contro l dial is set to FULL, the auto-deceleration mechanism will act to reduce th speed.

mid-range REMARK If the key in t he starting switch is turned ON within 1 5 secon ds after stopping the engine, it is work equipm ent to the ground by operating the leve rs. In addition, th e levers can also be operated to relea se any r emainin g pressure inside the hyd and to lower the boom after loadi ng the ma chine on a trailer .