Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION turn the key in and after 2 or 3 the engine starts, even if the accelerator pedal is The turbocharger rotates at extremely high speed. Immediately after the engine is started, the pressure of the lubricating oil has not risen sufficiently, so if the engine speed is suddenly raised, it may lead to damage or seizure of the turbocharger bearing. The turbo protect function acts to prevent this problem. It uses electronic control to prevent the engine speed from rising above a certain speed for the first few seconds after the engine started. 3 - 107 2. Depress ac celerator ped al (3) lightl 3.

Whe n preh eating p ilot l amp (2) g oes out, starting swi tch (1) to the STA RT position. The startin g motor will cran engin seconds, th e engine will start. 4. After the en gine starts, r eleas e the key i n starting switch (1). . (1). The key wil l automaticall y retu rn to the O N position 5. After the en gine starts, if the engine wate r temperatur e is low (below 20 °C (68 °F)), the warming-u (engine speed: 113 0 rpm) is automatically c arried out. For details, (PAGE 3-1 REMARK mediatel depressed, t he engin e speed will no t rise above 1130 r pm. Engine water temperature Turbo protect time above 20°C (68°F) 0 sec. -18°C to 20°C (-0.4°F to 68°F) 0 to 12 sec.

Below - 18°C (-0.4°F) 15 sec.