. OPERATION OPERATION STARTING IN COLD WEATHER WARNING the this may 3 - 108 To improve the ease of starting in cold weather, the low idling speed becomes slightly hi gher for the time given below and the engine so und is different. In addition, it fun ctions to make the acceleration g radual during this time. Engine water temperat Injection characteristics ure change time Above 20°C (68°F) 0 sec 0°C to 20°C (32°F to 68 °F) 0 to 6 sec -20°C to 0°C (-4°F to 32 °F) 6 to 12 sec -30°C to -20°C (-22°F to - 4°F) 12 to 15 sec Sit down in the operator's seat before starting the engine. Do not attempt to start the engine by short-circuiting the engine circuit.
Such an act may ca use serious bodily injury or fire. Check that there are no pe rsons or obstacles in the surroundi then sound the horn and s tart the engine. Exhaust gas is toxic. Whe n starting the engine in confined sp particularly careful to ensu re good ventilation. Do not accelerate the warming-up operation. engine suddenly before complet Do not keep the starting m seconds. If the engine does not star otor rotating continuously for more t, wait for at least 2 minutes before t start the engine again. If t he accelerator pedal is kept depressed after starting the eng engine speed will suddenl y rise after the turbo protect time, t damage the turbocharger.
It t akes some time to start up the engine when the machin e is left unused for more than ha lf a day in the ambient temperature of approx. -2 following manner. 0°C (-4°F). In that case, use the engine starting switch and accelerator pedal in the . T urn the key of starti ng switch (1) to the ON positio a w utomatic preheating w ill start and the preheating pilot l ill light up.