. OPERATION OPERATION OPERATION OPERATION The preheating time varies according to the engine coolant temperature when the engine is started. pilot lamp (2) goes out, turn the key in a pause for a minute or so. for a minute or so. will 3 - 109 The table shown below gives a guide to preheatin 2. Depress accelerato 3. starting switch (1) t 4. Method of starting engine in temperatures of approx. -2 0°C (-4 1) Keep the engin e starting motor running fo r the max. 20 seconds, holding the key of engine starting switch T position, until the engine starts up.
2) If the engine fa ils to start up even after ru nning the engin motor once (release the e ngine starting switch key), and try the s ame process again after 3) If the engine stil l fails to start up after the se cond attempt , try the same process for th e third time after a pause 5. When the engine h as started up and the engi ne speed release the key of engine starting switch (1 n to the ON position. automatically retur 6. After the engine st arts, if the engine water te mperature is l (below 20 °C (68 °F)), the warming-up op speed: 1130 rpm) i s automatically carried out. For details, see "A (PAGE 3-110)".