Komatsu — MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE

. OPERATION OPERATION USING SWITCH TO CHANGE BETWEEN FORWARD AND REVERSE (If equipped) WARNING 3 - 119 WHEN USIN If an attemp t is made to switc h the direction between forward and reverse when t he auto-shift is ON, normally, the gearshift ra nge will switch F3 -> R2, F 4 -> R2, or R3 -> F2, R4 -> F2 to make it possible to move the machine off quickly. However, if an attempt is ma de to shif t between forward and reverse when the m achine is traveling at high speed such as sh sound. At the sam e time, "E00 PAR If the alarm buzzer sounds, d epress th e brake immediately to reduce the travel sp eed, then operate the directional lever to swi tch between forw ard and r everse.

In particula r, if it is attempted to switch between forward and reverse in range II, th e gear range will not shift to 2nd, but will swit ch F3 -> R3, F4 -> R4, or R 3 -> F3, R4 -> F4. As a result, the reductio n in travel speed will be less than in range I, s o care is necess When the di rectional selector s witch actuation switch is at the ON position, if the directi onal lever is operated to F or R, the machine will travel in forward o r reverse er, regardless of the position of the directional s elector switch at the side of th nt control lever to the N position.

Priority is giv en to the operation When this is done, the central warning l Set the di rectional lever and d irectional selector switch at the side of the work equipme he directional leve r at the N