. OPERATION OPERATION OPERATION OPERATION Then the actuating switch enables the forward - reverse shifting to function. 3 - 120 2. Turn on directionalsele ctor switch on the right sid e of switching panel that enables dire Position (a): ON Position (b): OFF The two pilot lamps ligh t up, i.e.
one is the pilot la mp built i n the actuating switch and a selector pilot lamp on the machine m If the switch or the lever it to the correct position When directional lev If the directional leve flashes, and at the lights up and the ala In this condition, the according to the set Return the direction When directional sel started If the directional sel warning lamp lights In this condition, t directional selector s If the switch or the lever is in one of the following c ondition s, set it to the correct position .
er is not at N position When directional lev If the directional leve r is not at the N position, the pilot l amp flashes, and at the same time, the central warning lamp rm buzzer sounds. amp lights up and the ala In this condition, the machine will move forward or in reverse according to the set position of the directional lever. Return the direction al lever to the N position. When directional sel ector switch is at F or R w hen engine is started If the directional sel ector switch is at F or R, the central warning lamp lights up and the alarm buzzer s ounds. In this condition, t set directional selector s 3. Press the directional s equipment control leve r to the desired position.