Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING and the engine is running, it is possible to tow the 3 - 155 onditions, requireme nts for towing . Towing on flat horizontal roa ds will require the minimum rimpul l, while towing on slopes o r on unev en road surfa ces will req uire the maximum rim pull. Connect a diagram at WHEN ENGINE CAN BE USED If the transmission and steering w If the trans mission and machine o ut of mud or to move it fo r a sho rt distance The opera tor should sit hine being towed is towed. WHEN ENGINE CANNOT BE USE D ne stopped, use the following procedure. When towing a machine w ith the engi ne stopped, use th 1. 2. 3. 4. 1.

The trans mission oil do es not lubri cate the system, so remove t he front and rear drive sh afts. If necessary, block the tires t o prevent the machine fr om moving. ering cylinder. 2. The steer ing cannot b e operated, so remove the ste Even if th e brakes are in good co ndition, the brakes can only be used a limited numb er of times. There is no change i n the operating force for the brake pedal, but the braking force is reduced each time the pedal is d. depresse 3. Connect t he towing eq uipment sec urely. When carry ing out towing operations, use two machines of at least the same cla ss as the mac hine being t owed.

Connect o ne machine each to the front and r ear of the machine being towed, th en remove th e blocks fro m the ti res and to 4. Parking b The parki ng brake can nont be tur ned OF F. To rele ase the parking brake, do as follo