. MAINTENANCE SERVICE PROCEDURE CHECK TRANSMISSION OIL LEVEL, ADD OIL WARNING (F). then tighten the cap. 4 - 26 The p arts and oi l are at high temp erature immediately af ter the engine is stopped, and may cause burns. Wait for the temperature to go down befo re starting the w Carr y out this procedure if th ere is any sign of oil on the transmission case, or if there i s oil mixed with the co oling wate 1. Start the e ngine and run i t for at least 5 minut 2. Open the cap of oil filler p ort (F), remove dipsti ck (G), and wipe he oil off 3. I diagonally as shown in When doin g this, insert th e dipstick so that the tip contact s the bottom of the dipstick gui 4.
The oil lev el should be be tween the H and L m arks on dipstick G). f the oil le vel is below the L mark, add oil thro ugh oil filler port 5. I f the oil is above the H m ark, drain the exces s engine oil from drain plug (P), and check the oil level again. 6. I f the oil le vel is correct, in sert dipstick (G) in th e dipstick guide,