Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE 4 - 57 CHECK TIGHTENING PARTS OF TURBOCHARGER Contact your Komatsu distributor to have the tightenin g portions checked. CHECK PLAY OF TURBOCHARGER ROTOR Contact your Komatsu distributor to have the rotor play checked REPLACE CORROSION RESISTOR CARTRIDG 1. Set 2 levers (1) at the top of the corrosion resistor to the sid to th e CLOSED position. 2. Usin g a f ilter wrench, turn cartridge (2 ) to the l eft to remove i 3. Appl y engine oil to the sealing surface of a new cartridge, the insta ll it t o th e filter holder 4. Bring the packing surface into contact wit h the sea l surface o the fi lter holder, then tighten i t further approx.