Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE AXLE OIL WARNING remove drain REMARK Remove the mud and dirt from around plug (1), then remove the plug. the brand of REPLACE ELEMENT IN AIR CONDITIONER RECIRCULATION AIR FILTER, FRESH AIR FILTER 4 - 63 When changing the oil, apply the parking brake and secure the front and rear frames with the fram e lock bar. After the engine is s topped, the parts and oil are at high temperatur e, an d may cause burns. Wai t for the temperature to go down before starting the operation. oved, oil may spurt out, so turn it slowly to release the internal pressure, then remove it carefully.

When the plug is rem oved, oil may spurt out, so tur n it slowly to release the internal pressure, the Refill capacity (fro nt and rear, each): 52 liters ( 1. Set a container t o catch the oil under drain pl 2. Remove front an d rear oil filler plugs (1), th he oil. plug (P) to drain t 3. After draining the oil, clean drain plug (P) and install it again 4. Add oil through p lug hole (1) at the refill level . REMARK For axles with AS For lubricating oil is differ ent. Use the specified lubric 5. After adding oil, check at level plug (1) that the oil is at th specified level. For details, see "CHECK AXLE OIL LEVE 4-27)".

ADD OIL (PAGE REMARK For operations where the brake is used frequentl y, change the at shorter intervals. (Machine equipped w ith cab) (If equipped) Remove both the rec irculation air filter and fresh air filter in the s ame way as when cleanin g, and replace them with new parts. For details of cleanin g the recirculation air filter, se e "CLEAN ELEMENT IN AIR CONDITIO NER RECIRCULATION FILTER (PAGE 4-49 )". g the fresh air filter, see "CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER For details of cleanin (PAGE 4-44)".