Yamaha Motor Corporation, USA 150TR — Procedure

Operation EMU27764 Forward (tiller handle and remote control models) Tiller handle models 1. Place the throttle grip in the fully closed position. 2. Move the gear shift lever quickly and firmly from neutral to forward. Remote control models 1. Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to forward. which could result in loss of control and an accident. Tiller handle models 1. Place the throttle grip in the fully closed position. 2. Move the gear shift lever quickly and firmly from neutral to reverse. Remote control models 1.

Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to reverse. UP DN UP DN ZMU03909 ZMU03909 EMU27785 Reverse (automatic reverse lock and power trim and tilt models) EMU27820 Stopping engine Before stopping the engine, first let it cool off for a few minutes at idle or low speed. Stop- ping the engine immediately after operating at high speed is not recommended. EWM00190 WARNING When operating in reverse, go slowly. Do not open the throttle more than half. Oth- erwise the boat could become unstable, EMU27844 Procedure 1. Push and hold the engine stop button or 33