Daimler Trucks North America LLC Western Star — Western Star

Exhaust 49 2 3 4 5 4 3 2 1 01/29/2010 f490415 02/08/2010 f490417 1. Aft CGI Pipe 2. Retaining Ring 3. Graphite Gasket 4. Slip Clamp 5. CGI Bellows 1. CGI Bellows 2. Slip Clamp 3. Retaining Ring 4. Graphite Gasket 5. Forward CGI Pipe Fig. 11, Aft Facing Slip Clamp Installation Fig. 13, Forward Facing Slip Clamp Installation A A 2 1 3 02/23/2011 f490458 A. At least 7/16 inch (10 mm) 1. Forward CGI Pipe 2. CGI Bellows 3. Aft CGI Pipe Fig. 12, CGI Bellows Installation 14. Slide the end of the forward CGI pipe into the bellows, and properly align the pipe. 15. Secure the forward CGI pipe to the engine and any CGI pipe support brackets. 16.

Using the yellow marks, center the bellows be- tween the exhaust pipes. Verify that the pipe is inserted at least 7/16 inch (10 mm) past the face of the flange. See Fig. 12 , Ref. A. 17. Install the slip clamps on the bellows. Tighten the slip clamps 11 lbf·ft (15 N·m). 18. Start the engine and check for exhaust leaks. Tighten any clamps as needed. Western Star Maintenance Manual, September 2015 49/9 1