Daimler Trucks North America LLC Western Star — Western Star

Heater and Air Conditioner 83 f831578 05/21/2003 Fig. 5, Orientation of Sleeper Fresh-Air Filters Sleeper Fresh-Air Filter Cleaning, Foam Filters 1. Shut down the engine, set the parking brake, and chock the tires. 2. To access the sleeper HVAC assembly, enter the sleeper and remove the bottom drawer from the left-side cabinet. 3. Remove the air filters from the sleeper HVAC assembly. See Fig. 5 . 4. Clean the air filters, as follows. 4.1 Wash the air filters by flushing soapy water from the air-outlet side of the filter to the air-intake side of the filter. 4.2 Rinse the air filters by flushing clear water from the air-outlet side of the filter to the air-intake side of the filter.

4.3 Allow the air filters to air dry. 5. Install the air filters in the sleeper HVAC assem- bly. Make sure the arrow on the air filter is point- ing toward the sleeper HVAC assembly; see Fig. 5 . 6. Install the drawer in the cabinet. Western Star Maintenance Manual, September 2015 83/4