Air Intake 09 1 2 1 2 A 01/17/2012 f090496 1. Steel Plate 2. Rubber Fig. 10, Mounting Isolator OK 2. If necessary, replace the air cleaner element. For air cleaner element replacement instructions, see Group 09 of the Western Star Workshop Manual . 3. Inspect the air cleaner housing for cracks, leaks, or any other damage. If the air cleaner housing or element is damaged, replace it. B 4. Reset the air restriction indicator. 5. Each time the air cleaner housing is replaced, perform the procedures in MOP 13–01 . OK C 11/19/2014 f090513 NOTE: Each insert should protrude from the housing as shown in item A. 08/07/2007 f090452 A. Proper Fastener Installation B. Damaged Insert, Flush C.
Damaged Insert, Countersunk 1. Insert 2. Screw Fig. 11, Manual-Reset Air Restriction Indicator, Graduated Cowl-Mounted Air Cleaner The standard cowl-mounted air cleaner system used on Western Star trucks is a reverse air flow design. The air flow in this system flows from the inside of Fig. 9, Air-Cleaner-Housing Fasteners, 5700 Models Western Star Maintenance Manual, January 2015 09/5