Daimler Trucks North America LLC Western Star — Western Star

Engine Cooling/Radiator 20 the previous two steps until clean water flows from the radiator. 8. Detach the gun nozzle from the lower radiator hose opening. Connect the hoses. 9. Place a pan under the coolant filter to catch en- gine coolant. 10. Remove the coolant filter. Install and tighten a new filter. 11. Fill the cooling system with new coolant. 12. Install the pressure/filler cap. 13. Start the engine and turn on the cab heater. Allow the engine to warm to normal operating temperature. Check the radiator and hoses for leaks. Repair as required. 14. Shut off the engine and check the coolant level. See "Coolant Inspection" 20–01. Western Star Maintenance Manual, September 2015 20/5