Daimler Trucks North America LLC Western Star — Western Star

Suspension 32 Safety Precautions Low-friction suspensions, such as air and taper leaf, have dramatically changed the shock’s role. Shocks now play a critical role in dampening suspension oscillation. DANGER Properly functioning shocks can help to reduce the wear of more expensive suspension components, such as air bags, while assisting in the reduction of tire wear. Worn shocks simply cannot assist in pro- viding control over today’s sophisticated suspension systems. Quick Test When working on the vehicle, shut down the en- gine, set the parking brake, and chock the tires. Before working under the vehicle, always place jack stands under the frame rails to ensure the vehicle can not drop.

Failure to follow these steps could result in serious personal injury or death. 32–01 Suspension Inspection Shock absorbers function at temperatures ranging from air temperature to 350°F (177°C). A shock’s function is to slow the bounce of the vehicle’s springs. It does this by transforming the energy pro- duced by the spring to heat and dissipating it. As a result the shock should be slightly warm to hot to the touch after normal use. Front Suspension Check WARNING Do not replace individual leaves of a damaged leaf spring assembly; replace the complete spring as- sembly. Visible damage (cracks or breaks) to one leaf causes hidden damage to other leaves.

Re- placement of only the visibly damaged part(s) is no assurance that the spring is safe. On front spring assemblies, if cracks or breaks exist in the two top leaves, a loss of vehicle control could occur. Failure to replace a damaged spring assem- bly could cause an accident resulting in property damage, serious personal injury, or death. If ride deterioration is experienced and there is a suspicion that a shock has failed internally, which is visually undetectable, perform the following checks within a few minutes of operating the vehicle. 1. Drive the vehicle at moderate speeds for at least 15 minutes. 2.

Within a few minutes of driving, touch each shock absorber carefully on its body below the dust cover or tube. First touch a part close to the shock absorber (spring, frame) to establish a ref- erence temperature of metal. Inspect the front spring assemblies for cracked, bro- ken, or abnormally bent leaves. If any of these condi- tions exist, replace the spring assembly. See your Western Star dealer for replacement. Front and Rear Suspension Shock Absorber Check 3. All shock absorbers should be warmer than any part near the shock absorber (spring, frame). Suspect a failure in any shock absorber that is noticeably cooler than the shock absorber on the other end of the axle.

Different temperatures from axle to axle do not indicate failures, but cooler temperatures on any one axle does war- rant removal and examination of the cooler shock absorber. See Fig. 1 . Regularly checking shock absorbers and having weak shock absorbers replaced will help avoid un- scheduled down time and reduce overall mainte- nance costs. 4. To inspect for an internal failure, remove and shake the suspected shock. Listen for the sound of metal rattling inside. Rattling of metal parts can indicate that the shock has an internal failure. Shock Absorber Inspection The role of a shock has changed dramatically.

Not so many years ago, most suspensions had heavy multi- leaf springs with limited travel and a great deal of inherent friction. These suspensions quickly self dampened and therefore limited the amount of work the shock needed to perform. There are many conditions that indicate it may be time to replace shocks. Check for the following con- ditions. Western Star Maintenance Manual, September 2015 32/1