Daimler Trucks North America LLC Western Star — Western Star

Suspension 32 06/18/2001 f320896 Fig. 1, Temperature Touch Test 06/18/2001 f320892 1. Uneven tire wear (check wheel balance first). Fig. 2, Shock With Broken Eye and Tube 2. Ride deterioration. 3. Excess vibration. 4. Sagging taper leaf springs (this is not caused by weak shocks). 5. Premature wear on cab, electrical, and cooling system components. 6. Broken or torn air springs. Shocks will only affect this if they are broken or missing. 7. Upper or lower mount eye broken and dust tube broken. See Fig. 2 . 8. Upper or lower bushing cracked or deformed (when not under load). See Fig. 3 . 9. Bent or dented body. See Fig. 4 . Misting shocks are often misdiagnosed as failures.

Misting is the process whereby very small amounts of shock fluid evaporate at high operating tempera- tures. The mist passes through the upper seal of the shock. When the mist reaches the cooler outside air it condenses and forms a film on the outside of the shock body. When mixed with road debris and dust, a grime will often coat the body of the shock. Misting is perfectly normal and a necessary function of the shock. The fluid which evaporates through the upper seal area helps to lubricate and prolong the life of the seal. 06/18/2001 f320893 Many technicians find it difficult to differentiate be- tween a misting shock and a true leaker, which needs replacing.

A leaker will show clear signs of fluid leaking in streams from the upper seal. These streams can most easily be seen when the shock is fully extended and one inspects as far up the main body of the shock (underneath the dust cover or tube) as possible. See Fig. 5 and Fig. 6 . Fig. 3, Shock With Cracked Bushing Western Star Maintenance Manual, September 2015 32/2