Daimler Trucks North America LLC Western Star — Western Star

Suspension 32 06/18/2001 f320891 06/18/2001 f320894 Fig. 4, Bent and Dented Shock Fig. 6, Leaking Shock WARNING Do not replace individual leaves of a damaged leaf spring assembly; replace the complete spring as- sembly. Visible damage (cracks or breaks) to one leaf causes hidden damage to other leaves. Re- placement of only the visibly damaged part(s) is no assurance that the spring is safe. On front spring assemblies, if cracks or breaks exist in the two top leaves, a loss of vehicle control could occur. Failure to replace a damaged spring assem- bly could cause an accident resulting in property damage, serious personal injury, or death. IMPORTANT:

On multi-leaf suspensions, closely inspect each component of the leaf spring as- semblies, including the brackets, U-bolts, and related parts. 06/18/2001 f320895 2. Inspect the brackets for cracks in the castings. Inspect the V-rod tower welds for cracking or other signs of damage. Also check for contact between the frame rail and the upper axle clamp brackets. If contact exists, check the V-rod bush- ing for wear. Check the V-rod fastener torques. Fig. 5, Misting Shock Rear Suspension Check TufTrac Suspension 1. Inspect the suspension spring assemblies for pitted, cracked, broken, or abnormally bent leaves, and extreme rust. If any of these condi- tions exist, replace the spring assembly.

3. Inspect the rubber center bearing and spring tip pads for excessive wear, including de-lamination of the rubber-to-metal shim interface, and distor- tion and degradation of rubber. Western Star Maintenance Manual, September 2015 32/3