BAIC — Technical Education and Skills Development Act of 1994

UNIT OF COMPETENCY : DIAGNOSE AND REPAIR CHARGING SYSTEM UNIT CODE : ALT723397 UNIT DESCRIPTOR : This unit covers the knowledge, skills and attitudes required to diagnose and repair charging system and its component TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 106 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables 1.

Prepare to diagnose and repair charging system 1.1 Job requirements are determined from workplace instructions 1.2 Diagnostic information is sourced and interpreted using industry criteria 1.3 Diagnostic symptoms are analyzed using troubleshooting table guide and those most appropriate to the circumstances are selected 1.4 Hazards associated with the work are identified and risks are managed. 1.5 Tools, equipment, and materials are selected and checked for serviceability 1.6 Defective and damaged tools and equipment are reported following workplace procedures.

1.7 Availability of materials are checked and 1.1 Different job requirements 1.2 Diagnostic information 1.3 Troubleshooting guide 1.4 Industry criteria 1.5 Tools, equipment, and materials in diagnosing and repairing charging system 1.6 Procedure in accomplishing forms 1.7 Types of Alternator Pulley 1.8 Identifying hazards associated with the operation 1.9 Risk management 1.10 OSHS 1.11 Waste management 1.12 Tools and measuring equipment 1.1 Interpreting job requirements from workplace instructions 1.2 Selecting best tooling option for the work and sequence procedure to reduce time and material wastage 1.3 Sourcing and interpreting diagnostic information 1.4 Analyzing diagnostic options 1.5 Using troubleshooting guide 1.6 Identifying hazards 1.7 Managing risks 1.8 Selecting and checking tools, equipment and materials 1.9 Reporting non- serviceable tools and equipment 1.10 Checking and reporting the availability of materials