BAIC — Technical Education and Skills Development Act of 1994

TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 107 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables reported following workplace procedures 2. Diagnose charging system 2.1 Diagnostic tests are performed according to industry criteria. 2.2 Inspection is carried out according to industry criteria.

2.3 Inspection results are compared with manufacturer specifications 2.4 Faults are identified from diagnostic test results following industry criteria 2.5 Causes of faults are determined following industry criteria 2.5 Findings are reported according to workplace procedures, including recommendations for required repairs or adjustments 2.6 Safety practices are applied following Occupational Health and Safety (OSH) procedure.

2.1 Industry criteria 2.2 Component faults of charging system 2.3 Mensuration 2.4 Inspection procedure 2.5 Arithmetic operation 2.6 Battery tester 2.7 Fundamentals of Electromagnetism 2.8 Fundamental of electricity 2.9 Procedure in accomplishing checklists 2.10 OSHS 2.11 Wearing of PPEs 2.12 Health protocols issued by government on prevention on spread of and protection from infectious disease in the workplace 2.13 3Rs 2.14 5S 2.15 Attitude:

 Patience  Attention to details  Time conscious  Honest 2.1 Locating appropriate sources of information 2.2 Interpreting text, symbols, and wiring diagrams in diagnostic and repair information 2.3 Interpreting numerical information in manufacturer repair manual. 2.4 Performing diagnostic tests 2.5 Carrying out inspection 2.6 Comparing inspection results 2.7 Identifying faults and its causes 2.8 Reporting findings 2.9 Applying safety practices