BAIC — Technical Education and Skills Development Act of 1994

UNIT OF COMPETENCY : PERFORM MENSURATION AND CALCULATION UNIT CODE : ALT723215 UNIT DESCRIPTOR : This unit covers the knowledge and skills on how to use automotive measuring tools. TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 55 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables 1. Select measuring instruments 1.1 Component to be measured is identified based on job requirements. 1.2 Automotive measuring instrument is identified based on job requirements. 1.3 Correct specifications are obtained from repair manual. 1.4 Measuring tools are calibrated in line with job requirements.

1.5 Measuring instruments are checked for accuracy and adjusted according to manufacturer’s manual. 1.6 Defective measuring instruments are reported and returned to toolkeeper following industry standards. 1.7 Safety practices are applied following OSHS.

1.1 Category of measuring instruments 1.2 Types and uses of measuring instruments 1.3 Shapes and Dimensions 1.4 Use of user’s manual 1.5 Workshop procedures in reporting defective instruments 1.6 Characteristics of defective measuring instruments 1.7 Procedure in preparing report 1.8 OSHS in calibrating measuring instruments 1.9 Calibration of measuring tools 1.10 Inspection of measuring tools 1.11 Segregation and reporting of defective measuring instruments 1.1 Identifying and selecting measuring instruments 1.2 Visualizing objects and shapes 1.3 Calibration skills 1.4 Identifying defective measuring instruments 1.5 Reporting skills 1.6 Applying safety practices 1.7 Obtaining correct specifications 1.8 Checking measuring instruments for accuracy 1.9 Reporting and segregating defective measuring instruments 2.

Carry out measurements and calculation 2.1 Automotive measuring instrument is selected to achieve required outcome in 2.1 Formulas for volume, areas, perimeters of plane and geometric figures 2.1 Performing calculation 2.2 Applying formulas for volume, areas, perimeters of