TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 56 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables line with job requirements. 2.2 Accurate measurements are obtained in line with job requirements. 2.3 Calculation needed to complete work tasks are performed using mathematical operations. 2.4 Numerical computation is self- checked and corrected for accuracy following manufacturer’s workshop manual. 2.3 Tools’ limit of accuracy are read following manufacturer’s workshop manual. 2.4 Report is submitted to immediate supervisor following industry standard operating procedure.
2.5 Safety practices are applied following OSHS. 2.2 Different automotive measuring instruments 2.3 Calculation & measurement 2.4 Four fundamental operation 2.5 Linear measurement 2.6 Dimensions 2.7 Unit conversion 2.8 Ratio and proportion 2.9 Handling of measuring instruments 2.10 Tools’ limit of accuracy 2.11 OSHS 2.12 PPEs plane and geometric figures 2.3 Handling measuring instruments 2.4 Selecting automotive measuring instruments 2.5 Obtaining accurate measurements 2.6 Performing calculation 2.7 Self-checking and correcting numerical computation 2.8 Reading tools’ limit of accuracy 2.9 Applying OSHS 2.10 Wearing of PPEs 3.
Maintain measuring instruments 3.1 Measuring instruments are handled following manufacturer’s manual. 3.2 Measuring instruments are cleaned following manufacturer’s manual. 3.3 Instruments are stored according to manufacturer’s specifications and standard operating procedures. 3.1 Types of measuring instruments and their uses 3.2 Safe handling procedures in using measuring instruments 3.3 Four fundamental operation of mathematics 3.4 Formula for volume, area, perimeter and other geometric figures 3.1 Handling and maintaining measuring instruments 3.2 Disposing wastes 3.3 Practicing good housekeeping 3.4 Applying safety practices