BAIC — Technical Education and Skills Development Act of 1994

UNIT OF COMPETENCY : DIAGNOSE AND REPAIR IGNITION SYSTEM UNIT CODE : ALT723395 UNIT DESCRIPTOR : This unit covers the knowledge, skills and attitudes required to basic diagnosing and repair the ignition system such as ignition switch, spark plug, high tension wires/cables cables/ignition coil, and distributor. TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 91 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables 1. Prepare to diagnose and repair ignition system 1.1 Job requirements are determined from workplace instructions.

1.2 Diagnostic information is sourced and interpreted using industry criteria. 1.3 Diagnostic symptoms are analyzed using troubleshooting guide and those most appropriate to the circumstances are selected. 1.4 Hazards associated with the work are identified and risks are managed. 1.5 Tools are selected and checked for serviceability. 1.6 Defective and damaged tools and equipment are reported following workplace procedures. 1.7 Availability of materials are checked and reported following workplace procedures.

1.1 Different job requirements 1.2 Diagnostic information 1.3 Troubleshooting guide 1.4 Industry criteria 1.5 Tools, and equipment in diagnosing and repairing ignition system 1.6 Inspection of tools, materials and equipment for serviceability and availability 1.7 Procedure in accomplishing forms 1.8 Electrical Fundamentals 1.9 Hazards associated with the operation 1.10 Management of risk 1.11 Planning and organizing activities 1.12 Chemistry (battery solutions and chemical reactions) 1.13 Tools and scan tools 1.14 OSHS 1.1 Interpreting text, symbols and wiring diagrams in information relating to ignition system testing and repair equipment from manufacturer specifications and workplace instructions and procedures 1.2 Planning own work requirements and prioritize actions to achieve required outcomes and ensure tasks are completed within workplace timeframes 1.3 Determining job requirements 1.4 Sourcing and interpreting diagnostic information 1.5 Analyzing and selecting diagnostic symptoms 1.6 Identifying hazards