TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 92 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables 1.15 Waste management 1.16 3Rs 1.17 5S 1.7 Managing risks 1.8 Selecting and checking diagnostic tools and equipment 1.9 Reporting defective and damaged tools and equipment 1.10 Checking and reporting availability of materials 2. Diagnose ignition system 2.1 Ignition system inspection is performed according to industry criteria. 2.2 Inspection results are compared with manufacturer specifications. 2.3 Faults are identified from diagnostic test results.
2.4 Causes of faults are determined following industry criteria. 2.5 Findings and recommendations for necessary repairs or adjustments are reported according to workplace procedures. 2.6 Safety practices are applied following Occupational Health and Safety (OSH) procedure. 2.1 Industry criteria 2.2 Faults of ignition system 2.3 Mensuration 2.4 Arithmetic operation 2.5 Test of spark plug cable resistance/ continuity 2.6 Test of ignition switch 2.7 Test of ignition wirings 2.8 Procedures for removing Ignition components 2.9 Visual inspections of ignition components 2.10 Procedure in accomplishing checklists 2.11 OSHS 2.12 Wearing of PPEs 2.13.
Health protocols issued by government on prevention on spread of and protection from infectious disease in the workplace 2.14 3Rs 2.15 5S 2.16 Attitude 2.1 Locating appropriate sources of information efficiently 2.2 Read and Compare ignition timing checking procedure from repair manuals 2.3 Interpreting numerical information in the manufacturer’s repair manual 2.4 Measure voltage, current and resistance and use basic mathematical operations, including addition and subtraction, to calculate deviations from manufacturer specifications 2.5 Performing diagnostic tests 2.6 Carrying out inspection 2.7 Comparing inspection results