4M41 ENGINE - Injection Pump Assembly 11B-12-1 12. INJECTION PUMP ASSEMBLY REMOVAL AND INSTALLATION 4 6 7 5 19 17 2 11 1 18 20 13 25 ± 2 Nm 14 8 9 18 ± 2 Nm 12 10 16 15 3 Removal steps 1. Injection pump cover B 2. Injection pump cover A 3. Rubber spacer 4. Rubber spacer 5. Harness 6. Harness 7. Harness 8. Harness 9. Harness 10. Fuel return hose 11. Fuel leak-off hose 12. Fuel suction hose A A " " B A 13. Injection pipe 14. Bolt 15. Pump stay 16. Pump stay " A A 17. Injection pump assembly 18. O-ring 19. Rubber spacer 20. Stay Caution 1. Fuel is highly flammable. Keep it away from flames and sources of heat. 2. Be sure to wipe up spilt fuel completely. It could catch fire. 3.
Have the injection pump assembly 17 serviced at an appropriate Zexel service station. 4. Dust particles entering the injection pump assembly 17 can seriously affect the engine performance. To prevent it, fully cover the openings left after the removal of parts such as pipes and hoses. 5. Before installing the injection pipe 13, check to ensure that the pipe seating surface is free from any damage and unevenness. PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added