Mitsubishi — 12. INJECTION PUMP ASSEMBLY

4M41 ENGINE - Injection Pump Assembly 11B-12-3 (4) Confirm that the notch F on the injection pump gear E is aligned with the mating mark H on the flange plate G . Then push the injection pump assembly further into the front plate. When meshing the gears, the notch F on the gear should move in the direction M . G E F H M 4ME0544 " B A INJECTION PIPE INSTALLATION Tighten the union nut B of the fuel injection pipe 13 while locking the delivery valve holder A to prevent it from rotating together. B A 13 PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added