Mitsubishi — 13. INJECTION PUMP GEAR

4M41 ENGINE - Injection Pump Gear 11B-13-2 REMOVAL SERVICE POINT A A " INJECTION PUMP GEAR REMOVAL Using the special tool, remove the injection pump gear 7 . MH062567 7 INSTALLATION SERVICE POINTS " A A FLANGE PLATE INSTALLATION Install the flange plate 11 while aligning the mating marks A on the flange plate and the injection pump 20 . 11 A 20 Locating pin 7 A B " B A INJECTION PUMP GEAR ASSEMBLY INSTALLATION (1) Clamp the injection pump gear 7 in a vice B . Protect the gear teeth with pieces of waste cloth A or the like as shown. (2) Remove the locating pin from the pump gear 7 . Caution 1. Check the removed locating pin for deformation or damage before using it again. 2.

Replace the locating pin if deformed or damaged. C 4 (3) Install the injection pump sub gear 4 , spring 5 and pins 6 onto the injection pump gear 7 as shown. (4) Hook each pin 6 on the spring 5 at C . 5 6 6 6 5 7 PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added