4M41 ENGINE - Injection Pump Gear 11B-13-3 3 (5) Fit the snap ring 3 onto the injection pump gear. (6) Fit the special tool in the hole D in the sub gear 4 . Turning the sub gear with the special tool counter-clockwise, align the hole E in the sub gear 4 with the hole F in the pump gear 7 , then install the bolt G . (7) In that state, strike the locating pin into the hole H in the sub gear 4 , then remove the bolt G . G D 4 E H MH063473 7 D F Locating pin 7 PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added