4M41 ENGINE - Timing Gear and Balance Shaft 11B-19-7 25 4. IDLER GEAR BUSH LH AND IDLER SHAFT If the idler gear bush 25 to idler shaft 27 clearance exceeds the specified limit, replace the defective part. Standard value: 0.02 - 0.05 mm Limit: 0.1 mm 27 5. IDLER SPROCKET BUSH AND IDLER SHAFT If the idler sprocket bush 43 to idler shaft 45 clearance exceeds the specified limit, replace the defective parts. 43 Standard value: 0.02 - 0.06 mm Limit: 0.1 mm 45 PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added