Komatsu — 4.9.1.n LUBRICATING

MAINTENANCE PROCEDURE 4.9.1.m CHECK, CLEAN AND LUBRICATE CAB SLIDE DOOR RAIL AND ROLLER (Machine equipped with cab) CHECKING When opening or closing the slide door, if it is clogged with mud and does not move freely, clean and supply grease to roller (2) and rail (1) of the slide door. CLEANING 1. Open and close the door, and use a brush to remove any dirt from rail (1). 2. Use a cloth to wipe off any dirt from rail (1). GREASING IMPORTANT Do not use high-viscosity oil for the lubricant. Use grease only. 1. Spray rail (1) and roller (2) thoroughly with lubricant. 2. After spraying with lubricant, slide the door and check that the door opens and closes smoothly.

If the movement is not smooth, contact your Komatsu Util­ ity Dealer for repair. 4.9.1.n LUBRICATING Boom swing cylinder foot pin (1 place) Prepare a grease gun 1. Using a grease gun, supply grease to the grease fitting is marked by arrows. 2. After greasing, wipe off any old grease that was pushed out. 189