Vehicle Access and Features Passenger’s Seat amount of injury resulting from accidents or sudden stops. For this reason, the manufacturer urges that the driver and all passengers, regardless of age or physical condition, use seat belts when riding in the vehicle. The passenger’s seat is not adjustable. See Fig. 2.7 . Access to the storage compartment under the seat is obtained by moving the release lever and tilting the seatback forward. Seat belt assemblies in the vehicle meet Federal Motor Vehicle Safety Standard 209, "Type 1," and "Type 2" requirements. They are recommended for all persons weighing over 50 pounds (23 kg).
A child restraint system should also be provided for each child weighing 50 pounds (23 kg) or less. It should meet the requirements of Federal Motor Vehicle Safety Standard 213, "Child Restraint Systems." When provid- ing such a restraint system, carefully read and follow all instructions pertaining to installation and usage for the child. Make certain the child remains in the restraint system at all times when the vehicle is in motion. In addition to seat belt assemblies, tether belts are in- stalled on suspension-type seats. Tether belts help se- cure the seat to the floor and are intended to restrain the seat and seat belt in case of an accident or sudden stop. f910247 09/09/97 Fig.
2.7, Passenger’s Seat Release Lever (typical) Seat Belts and Tether Belts General Information IMPORTANT: Seat belts have a finite life which may be much shorter than the life of the vehicle. Regular inspections and replacement as needed are the only assurance of adequate seat belt se- curity over the life of the vehicle. Seat belt assemblies are designed to secure persons in the vehicle to help lessen the chance of injury or the 2.7