Komatsu — Full page photo print

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Coolant Level, Add Coolant WARNING 1. Open the door at the left of the machine, and check if the SYSTEM (PAGE 4-25)". 3 - 115 Do not open th e radiator cap unles s necessary. W hen checking the coolant, always wait for the e ngine to cool down and c heck the sub tank. Immediately a fter the engine is sto pped, the coola nt is at a high te mperature and the radiator is under high internal pressure. If the cap is re moved to check the coolant level in this condition, there is a hazard of burns. Wait for the temperature to go down, then tur n the cap slowly to release the pres sure and remov e it carefully.

ub-tank (1) (show am on the righ t) is between th e FULL and LOW marks. If the c oolant level is low, add coolant to the FULL level through the fil ler port of sub-tank (1). After addin g coolant, tighten the cap securely. If the sub- coolant. Aft tank (1) is empt er inspecting, rep y, there is pr air any probl obably leakag em immediate e of ly. If or. If there is no problem, check th e coolant lev el in the radiat the coolant level is low, add c oolant to the r adiator, then fil l the sub-tank (1 4. If the inside of sub-tank (1) is dirty and the water level ca nnot be seen, us e the procedure in "CLEAN INS IDE OF COOLING