. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil 2. Remove dipstick (G), and wipe the oil off with a cloth. 3. Fully insert dipstick (G) into filler pipe (F), then remove it. REMARK 3 - 116 temperature to go down be fore performing this 1. Open t he engine ho 4. The oil level should be between the H and L marks on d ipstick (G). If the o il level is below the L mark, add oil through oil filler port(F). 5.
If the oi l is above the H line, open drain valve (P) at the bottom of the e ngine oil pa n, drain the excess engine oil, then check then check the oil l evel again. 6. If oil lev el is correct, securely tighten th e oil filler ca p and close the eng When chec king the oil le vel after the engine has been operated, wait for at least 15 minutes a fter stopping the engine before che I f the mach ine is at an a ngle, make it hori zontal before checking.