. MAINTENANCE MAINTENANCE INFORMATION 4 - 3 Clean and replace Clean electrical co mponents, especially the starting moto r and alternator, to avoid accumulation of d When checking an d replacing the oil or filters, move the m achine to a place where there i s no dust an d take care to prevent dust fro Avoid Mixing Lubrica If a different brand or grade of oil has to be added, drain the ol d oil and replace all the oil with the new bra nd or grade of oil. Never mix diffe Locking the Inspectio n Covers r securely into position with the lock bar.
If inspection or maintenance is performed with Lock inspection cove with inspection cover not l ocked in position, there is a danger tha t it may be suddenly blow shut by t he wind and cause injury to the worker. Hydraulic System - Ai r Bleeding When hydraulic equip ment has been repaired or replaced, o r the hydraulic piping has been removed a nd installed again, the air must be bled from the circuit. For details, see "B LEEDING AIR FROM HYDRAULI C SYST EM (PAGE 4-45)". Hydraulic Hose Install ation rts at locations where there are O-rings or gasket seals, clean the mounting surface, and arts. e careful not to forget to assemble the O-rings and gaskets.
When removing pa replace with new p When doing this, b e careful not to forget to assemble the When installing the hoses, do not twist them or bend the m sharply. If they are installed so, t heir ser vice life will be shortened extre mely and they may be damaged. urface, and Checks After Inspection and Maintenance Works If y ou forget to perform the checks after inspection and mainte nance, unexpected problems may occur, a nd this may lead to serious injury or property damage. Always do the foll owing: gotten? rmed correctly?
Checks after opera tion (with engine stopped) Have any inspe Have all inspect Have any tools inside the mach Are there any le Have any inspe ction and maintenance points been for Have all inspect ion and maintenance items been perfo Have any tools or parts been dropped inside the mach ine? It is particularly dangerous i f parts a re dropped ine and get caught in the lever linkage Are there any le akage of coolant or oil? Have all nuts Checks when oper For details of th ENGINE IS RU Are the inspecti Is there any lea For details of th NNING (PAGE 2-37)" and pay careful Are the inspecti on and maintenance items working pro Is there any lea kage of fuel or oil when the engine spe