CONTROLS - Cab Accessories 7. Select - press to choose the setting being changed while adjusting the either the time or the alarm 8. Time and Alarm value setting - press to change time/date and or alarm setting 9. Active alarm icon - alarm is activated when this icon appears Set the Sleeper Alarm Clock Time These are instructions to set the time on the optional alarm clock installed in the sleeper. 1. Press the MODE button twice until the screen displays the AL icon. 2. Use the UP and DOWN buttons to adjust the setting. 3. Press the SEL button to adjust the next setting and use the UP and DOWN buttons to change the setting. 4. Repeat this for all areas.
The alarm clock will scroll in the following order each time you press the SEL button. Hours Minutes 5. To exit and save your settings, press the MODE button once you have set the minutes. 1. Press the MODE button until the screen begins flashing. 2. Use the UP and DOWN buttons to adjust the value. 3. Press the SEL button to adjust the next setting and use the UP and DOWN buttons to change the value. 4. Repeat this for all settings. The alarm clock will scroll in the following order each time you press the SEL button. Year Month Day Hours Minutes 5. Press the MODE button once you have set the minutes which will exit and save your settings.
3 Turning the Alarm On/Off Press the ALM button to turn the alarm on and off. The icon (9) will illuminate when the alarm is active. When time reaches the set time the alarm will ring. If the SNZ button is not pressed, the alarm will continue ringing for 15 minutes then will automatically stop. Pressing any other button except SNZ (2) will turn the alarm off. Snooze Operation Cab Accessories When the alarm is ringing press the SNZ button (2) to silence the alarm for 9 minutes. The small bell icon (9) will flash until the alarm is shut off. The SNZ button can be used as many times as desired. General accessories in the cab.
Radio (Optional) Dim Control Operation As an option, your vehicle has either an AM/FM Stereo Receiver, which may or may not have a CD, or may have the stereo system integrated with your Navigation and telematics unit. For Press the DIM+ or DIM-buttons (3, 4) to change the brightness of the display. Set the Sleeper Clock Alarm These instructions are to set the time for which the alarm will sound. Y53-6047-2HEN (03/18) 121