CONTROLS - Sleeper Alarm Clock Air Dehumidification temperature from the vents that differs from the temperature set point. To ensure proper operation, it is recommended that the driver redirects the air instead of adjusting the temperature set point or closing the vent. The system may have difficulties in obtaining the desired cabin temperature if the temperature setting is repeatedly changed. The mode of air distribution inside the cab is set using the air distribution dial. Five icons on the dial indicate the primary mode options. The driver may also select a secondary mode in between the primary modes indicated by points on the dial. Airflow is provided to the side windows in all modes.
This mode is helpful with windshield defogging. A pleated air filter located under hood provides filtration for dust, pollen, and debris. If equipped, your vehicle may also provide for ember filtration or fine particulate filtration. Related concepts The air conditioner system can be used to reduce the humidity level of the cab and clear fog from the windshield. Adjust fan speed to the desired airflow setting. Engage the air conditioner compressor by pressing the air conditioner button. Set the air source to outside air mode by pressing the outside air / recirculation air button. The button indicator light should NOT be illuminated.
3 Sleeper Alarm Clock The Optional Sleeper may include an alarm clock for the sleeper occupants. NOTE That the A/C compressor may not en- gage when the outside temperature is below 34єF (1єC). Outside Air / Recirculation Air 1. Alarm - press to turn on the alarm 2. Snooze - press to snooze the alarm bell 3. Dimmer/brighter - press to make display brighter 4. Dimmer/darker - press to make display less bright 5. Increase value of setting 6. Decrease value of setting Selecting air recirculation mode completely isolates the cab interior from the outside air. This mode is helpful in preventing dust, pollen, and odors from entering the cab.
Additionally, recirculation mode can reduce the amount of time needed to cool down the vehicle while in maximum cool down. Note that the mode may increase fogging on the windshield. A coarse air filter is provided for recirculation air and is located under the IP. The outside air mode provides for 100% outside air into the cab. Cab Air Distribution Equal distribution of air is important in maintaining a constant cab interior temperature. For best performance, all vents should remain open to allow the AUTO mode to function properly. To maintain the selected cab temperature the AUTO mode may provide an air 120 Y53-6047-2HEN (03/18)