PACCAR 579, 567 — Air Conditioner Operating Tips

CONTROLS - Heating and Air Conditioning Air Conditioner Operating Tips Common operating tips to maximize the effectiveness of the cab air conditioner. maintain a constant cab temperature while defrosting the windshield. Note however that performance may be reduced. Adjust the fan speed to high by rotating the fan control dial clockwise. Set the air distribution dial to the defrost mode setting. This automatically engages the outside air and the air conditioner compressor. Adjust the temperature dial to add heat as needed. For maximum performance, adjust the temperature to maximum heat by rotating the temperature dial clockwise.

The driver may also use the floor/defrost setting on the air control Engage the air conditioner compressor by pressing the air conditioner button. Set the air source to recirculation mode by pressing the outside air / recirculation air button. The button indicator light should be illuminated. CAUTION 3 During extreme cold weather, DO NOT blow hot defroster air onto cold wind- shields. This could crack the glass. Turn the Air Flow Control Dial to De- frost and adjust the fan speed accord- ingly while the engine warms. If the engine is already warm, move the Temperature Control Dial to "cool," then gradually increase the tempera- ture when you see that the windshield is starting to warm up.

Failure to com- ply may result in equipment damage. For Maximum Heating Adjust the fan speed to high by rotating the fan control dial clockwise. Set the air distribution dial to the floor setting. Adjust the air temperature to maximum heat by rotating the temperature dial clockwise. Defrosting and Defogging the Windshield For Maximum Cooling Adjust the fan speed to high by rotating the fan control dial clockwise. Set the air distribution dial to the panel setting. Adjust the air temperature to maximum cool by rotating the temperature dial counterclockwise. NOTE The cab windshield and side windows can be cleared of ice and fog in two ways. The first is to use the MAX defrost mode.

The second is to manually adjust the air distribution dial to the defrost position. The manual defrost/defogging mode differs from the MAX defrost mode by allowing the driver to select an air temperature other than full heat. This allows the driver to The engine must be at operating tem- perature for maximum heating. If oper- ating in AUTO mode, heating airflow is not allowed until the engine warms sufficiently to provide required coolant temperatures. Y53-6047-2HEN (03/18) 119