PACCAR 579, 567 — Anti-Lock Brake Systems (ABS)

DRIVING - Brakes Engage Trailer Hand Brakes the ATC can cause overheating of the drive wheel brakes. Engine torque or vehicle speed should be reduced to eliminate wheel spin and prevent excessive application of the ATC system. Except for checking for proper illumination of the ABS and traction control warning lamps when first starting the vehicle, and for monitoring these lamps while driving, no special operating procedures are required. For detailed system description, see literature for your specific ABS that was provided with your vehicle. WARNING The Anti-Lock Brake System is a criti- cal vehicle safety system.

For the safety of you and others around you, have the vehicle submitted for periodic preventive maintenance checks as well as having any suspected prob- lems immediately checked by an au- thorized dealer. Failure to properly maintain your brake system can lead to serious accidents. Failure to comply may result in death, personal injury, equipment or property damage. 4 Press the lever down to engage the Trailer Hand Brakes. Push the lever back up to release the Trailer Hand Brakes. Anti-Lock Brake Systems (ABS) Information on using the anti-lock brake system. Automatic Traction Control General information on ABS and automatic traction control.

This vehicle may be equipped with an anti- lock braking system (ABS). This ABS reduces the possibility of wheel lock-up. If a wheel is about to lock during braking, the ABS will automatically adjust air pressure to the brake chambers on the appropriate wheel(s) to prevent wheel lock-up. The ABS is automatically turned on when the ignition switch is turned on. Your truck/tractor ABS is equipped with an automatic traction control (ATC) feature. This feature is controlled by a switch on the dash. Do not allow the traction control lamp to remain on continuously for an extended length of time. Extended continuous use of 148 Y53-6047-2HEN (03/18)