DRIVING - Brakes ABS system, which may affect its operation. the system will intervene to assist the driver. NOTE CAUTION Very few trailers built before 03/01/2001 have this option. Trailers built after 03/01/2001 are built with PLC technology. The center pin of the 7-way trailer light line may be constantly powered for ABS. Make sure it will not accidently turn on trailer equipment. ESC may reduce the vehicle speed automatically. To minimize unexpected deceleration and reduce the risk of a collision the operator must: Avoid aggressive driving maneuvers, such as sharp turns or abrupt lane changes at high speeds, which might trigger the stability system.
Always operate the vehicle safely, drive defensively, anticipate obstacles and pay attention to road, weather, and traffic conditions. ABS, ATC, and ESC stability systems are no substitute for prudent, careful driving. 4 Special Trailer ABS (Without PLC) Option Advanced ABS with Stability Control What you need to know about your vehicle's braking, traction, and stability control features.
If a trailer does not have PLC, but it does have ABS that is powered through an optional second trailer connector (ISO 3731) and that trailer ABS is designed to control the Trailer ABS Warning Lamp in the cab and the vehicle has been ordered with the option to turn on this lamp for these types of trailers, then this lamp will turn on when that trailer ABS has a system problem. This should be checked by a dealer as soon as possible. The Trailer ABS Warning Lamp will not turn on for the power-on test when connected to these types of trailers. Electronic Stability Control is a feature that reduces the risk of rollovers, jackknifing, and other loss of control situations.
ESC features include Roll Stability Program (RSP) and Yaw Control. During operation, the ECU of the Bendix ® Advanced ABS system constantly compares performance models to the vehicle’s actual movement, using the wheel speed sensors of the ABS system, as well as lateral, yaw, and steering angle sensors. If the vehicle shows a tendency to leave an appropriate travel path, or if critical threshold values are approached, Roll Stability Program Bendix ® Roll Stability Program (RSP), an element of the overall ESC system, addresses rollover conditions. In the case of a potential roll event, the ECU will override the throttle and quickly apply 150 Y53-6047-2HEN (03/18)