PACCAR 579, 567 — Brake System

MAINTENANCE - Brake System the original specifications can affect the whole system. All of the following areas are interrelated and must conform to original specifications: Tire Size Drum brakes Cam Radius Wedge Angle Drum Radius Brake Linings Brake Chambers Slack Adjusters Disc Brakes Disc Rotors All vehicle operators should check their brakes regularly. CAUTION WARNING The air brake system of this vehicle was configured for ONE of the follow- ing operations: tractor or truck, and complies with the respective portions of FMVSS 121.

A tractor shall not be operated or configured as a truck, nor shall a truck be operated or configured as a tractor, without significant modifi- cations to the air brake system in order to retain compliance with FMVSS 121. Contact your dealer for instructions. Do not use any replacement part in the brake system unless it conforms ex- actly to original specifications. A non- conforming part in your vehicle's brake system could cause a malfunction re- sulting in an accident causing death or personal injury. Sizes and types are so related to one another that a seeming- ly unimportant change in one may re- sult in a change in how well the brakes work for you on the road.

If parts do not work together properly, you could lose control of your vehicle, which could cause a serious accident. 5 WARNING Do not use brake linings with a thick- ness below the specified minimum. Such linings will have lining rivets ex- posed that can damage the brake drum and reduce brake efficiency, which could cause death, personal in- jury or system failure. Brake adjustment and brake balance must be set carefully to (1) make the most efficient use of the forces available for braking and (2) allow equal stopping forces at all wheels.

Once a brake system is set to specifications, changing any one of its components or any combination of components may cause the system to not work as well. All parts have to work together to perform as they should. Any replacement components in your brake system should be exactly equal to the original components. Any changes from 214 Y53-6047-2HEN (03/18)