PACCAR 579, 567 — Auto Slack Adjuster

MAINTENANCE - Brake System Air Disc Brakes This vehicle may have disc brakes instead of drum brakes. 1. Park on level ground and chock the wheels. 2. Temporarily release the parking brakes. 3. Looking from the ground up at the bottom of the caliper and rotor, compare the relative position of two notches; one located on the caliper and the other on the carrier. 4. Take a measurement from between these two notches and compare them to the specifications to determine if the pads need to be replaced. Have a qualified mechanic perform a detailed inspection if the notches are not found.

The pads and rotors should be measured and compared against the manufacturers specifications located in the brake manufacturer’s service manual. brake calipers can burn skin on contact. 2. Chock the wheels. 3. Temporarily release the parking brakes. 4. Grab the caliper and move it. This movement is Running Clearance. 5. Proper Running Clearance is 0.08 inch (2 mm) of movement of the brake caliper (approximately the thickness of a nickel) in the inboard/outboard direction. Have a qualified mechanic provide further inspection if the caliper does not move or appears to move more than the specified clearance 5 1. Brake Caliper 2. Caliper Mounting Flange 3. Brake Rotor 4.

Inspection Notches Auto Slack Adjuster The autoslack adjuster is a mechanism to maintain the correct amount of space How to inspect brake pads on disc brakes Have brake pads inspected by a qualified mechanic for wear at regular intervals according to the Preventive Maintenance Schedule. In severe service or off-highway applications inspect the linings more frequently. Inspect Disc Brake Caliper for Running Clearance Running clearance describes the amount of movement between the caliper and the mounting flange. Regularly inspect caliper for Running Clearance: 1. Stop the vehicle on level ground and let the brakes cool down. Hot To inspect the brake pads: Y53-6047-2HEN (03/18) 215