PACCAR 579, 567 — Front Axle and Suspension

MAINTENANCE - Front Axle and Suspension few examples include the alternator, engine Electronic Control Unit (ECU), transmission ECU, ABS ECU, navigation devices, diagnostic devices, and monitoring devices. Related reference Sliding Fifth Wheels Lubricate bearing surface of support bracket through the grease fittings on the side of the fifth wheel plate. Use a water resistant lithium-base grease. NOTE Whenever possible, torque all frame fasteners on the nut end, not the bolt head. Fifth Wheel Monthly Maintenance Proper preventive maintenance is essential to trouble-free service and safe operation of the fifth wheel. Refer to specific manufacturer's literature for any special instructions.

Remove fifth wheel from vehicle. Refer to the Shop Manual, "Fifth Wheel Removal." Steam clean the fifth wheel and mounting brackets. Check all moving parts for excessive wear or damage. Replace all worn or broken parts. Complete two-month service procedure. Install fifth wheel. Refer to the Shop Manual, "Fifth Wheel Installation." Tighten all frame fasteners with a torque wrench. See Frame Fastener Torque Requirements on page 275. NOTE The plate must be lifted up slightly to relieve the weight of the bracket while applying grease. 5 Refer to specific manufacturer's literature for any special instructions. Steam clean the fifth wheel. Check lock guard operation using a commercial lock tester.

Clean and oil all moving parts. Lubricate the lock mechanism with a lithium-base grease. All grease fittings (especially those which grease the top surface of the fifth wheel). Front Axle and Suspension Lubrication and inspection of front axle assemblies. Refer to the axle manufacturer's operator's manual for lubrication specifications and service intervals. Axle Lubrication Fifth Wheel Bi-Annual Maintenance Proper preventive maintenance is essential to trouble-free service and safe operation of the fifth wheel. 248 Y53-6047-2HEN (03/18)