. MAINTENANCE SERVICE PROCEDURE 4 - 36 7. When the lamp goes out, th e air bleed operation is completed. 8. Close air bleeding valve (2) 9. Start t he e ngine. I f the engi ne does not start, t ry a gain by 1) Check that air bleeding valve (2 ) is closed 2) Tilt electric priming pum p switch (3) to t he ON position 3) Try to start the engine w hile the electric primin g pump is in operation. If the engin e still does not start, wait for approx. 2 minutes, a nd then repeat steps 2 ) and 3) 4) After the e the engine approx.
completely NOTICE Do not keep the starting motor rota ting continuously for mor e tha n 20 If the engine wi ll not star t, wait for at least 2 minutes before t rying to start the