. MAINTENANCE SERVICE PROCEDURE CHECK ALTERNATOR, STARTING MOTOR contact your Komatsu distributor for inspection or CHECK WATER PUMP water pump for water leakage. If any part is leaking, ask your Komatsu distributor for CHECK AIR COMPRESSOR CHECK FAN PULLEY AND TENSION PULLEY CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER 4 - 86 The brus repair. If the engine is st arted frequently, carry out inspection ev Check around th inspection/repair. Ask your Komats Check for play of t he pulley and leakage of grease. If any p roblem is found, please contact your Komatsu distributor. Check clamps (1) to (18) for loose bolts and hardening of the rubber parts.
If there are any loose bolt s or hardened rubber, please co ntact your Komatsu distributor for repla cement.